Teltonika Outdoor 4G Router OTD140

Teltonika Outdoor 4G Router OTD140

The OTD140 outdoor router features a dedicated and durable IP55 plastic housing and an integrated mounting bracket, making this outdoor 4G router easy to deploy and capable of withstanding outdoor environmental conditions. Beyond that, this outdoor router is equipped with LTE Cat 4 connectivity, compatibility with RMS for remote management capabilities, and two PoE-in/out Ethernet ports.

Specifications:

Mobile

Mobile module: 4G LTE up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL Mbps
3GPP Release: Release 9
SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status: IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, MNC
SMS: SMS status, SMS configuration, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD: Supports sending and reading Unstructured Supplementary Service Data messages
Block/Allow list: Operator block/allow list (by country or separate operators)
Band management: Band lock, used band status display
SIM PIN code management: Enables setting, changing, or disabling the SIM card’s PIN
APN: Auto APN
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
Passthrough: Router assigns its mobile WAN IP address to another device on LAN

Ethernet

LAN: 2 x ETH ports (can be configured as WAN), 10/100 Mbps, IEEE 802.3/802.3u/802.3az compliant, supports auto MDI/MDIX
PoE In ports: 1 x PoE In
PoE In standards: 802.3af/at
PoE Out ports: 1 x PoE Out
PoE Out standards: 802.3af Alternative B
PoE Max Power per Port (at PSE): 15 W Max (power supply unit dependent)

Network

Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP passthrough support: H.323 and SIP-ALG protocol NAT helpers
Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall: Port forward, traffic rules, custom rules, TTL target customization
Firewall status page: View all Firewall statistics, rules, and rule counters
Ports management: View, enable, disable ports; auto-configuration toggle; transmission speed control
Network topology: Visual representation of device connections
DHCP: Static/dynamic IP allocation, DHCP relay, DHCP server configuration, static leases with MAC wildcards
QoS / SQM: Traffic priority by source/destination, service, protocol, port, WMM, 802.11e
DDNS: Supported by over 25 providers; others configurable manually
DNS over HTTPS: Enables secure DNS resolution via HTTPS proxy
Network backup: VRRP, wired failover options
Hotspot: Captive portal, RADIUS server support, MAC auth, SMS auth, SSO, custom themes, walled garden, user scripts
SSHFS: Mount remote file systems via SSH
Traffic Management: Real-time monitoring, wireless signal charts, traffic usage history

Security

Authentication: Local, Radius, TACACS+
Firewall: Zone-based firewall, packet filtering, custom firewall rules, deep packet inspection (DPI)
Content filtering: L7 filtering and DNS filtering for blacklists/whitelists, adult content, gambling, and others
Access control: MAC filtering, port blocking, IP/MAC binding

VPN

OpenVPN: Client/server mode, TLS/SSL encryption, compression, certificate/username-password-based authentication
IPsec: IKEv1/v2, X.509 certificates, pre-shared keys
GRE: GRE tunnel configuration support
L2TP: Client/server support, optional encryption
PPTP: Client/server support
WireGuard: Fast, modern VPN protocol with simple configuration
DMVPN: Dynamic Multipoint VPN using NHRP and IPsec

MODBUS

MODBUS TCP: MODBUS master/client and slave/server support
MODBUS RTU: Over RS232, RS485; master/client and slave/server
MODBUS Serial to TCP gateway: Transparent MODBUS bridging
MODBUS to JSON: Converts MODBUS registers into JSON for easy integration
MODBUS polling: Periodic register polling and control from WebUI
MODBUS logging: Local or remote logging of MODBUS data

DLMS/COSEM

DLMS/COSEM client: Communication with energy meters using DLMS/COSEM protocol
Communication modes: HDLC and TCP/IP
Data extraction: Read data from objects, structured format output (JSON, XML)
Scheduling: Periodic reads and data uploads

API

Remote API: RESTful API for status, configuration, control
SMS API: HTTP and email-to-SMS APIs
JSON-RPC: Lightweight remote procedure call protocol support
MQTT: Publish/subscribe integration, supports JSON payloads
SNMP: SNMP v1/v2/v3 for monitoring and management
Modbus API: MODBUS data via REST API
WebSocket: Real-time data feeds for WebSocket clients

Management

WebUI: Responsive graphical web interface for all device functions
CLI: Full-featured command-line interface via SSH, Telnet, serial
TR-069: Remote management protocol support for auto-configuration servers (ACS)
SMS management: SMS-based control and configuration
FOTA: Firmware-over-the-air updates with scheduling support
Backup & Restore: Full configuration backup/restore to/from file or remote
Multi-user access: Role-based access with permission levels
Audit logs: Tracks changes and access for compliance

IoT Platforms

Integration support: Microsoft Azure IoT Hub, AWS IoT Core, Google Cloud IoT, Cumulocity, ThingWorx, Ubidots, and others
Protocols: MQTT, HTTP(S), CoAP, WebSockets
Payload formats: JSON, XML, custom formats with scripting
Custom integration: Script-based logic and cloud connector support

Mobile Module: 4G LTE up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL Mbps

3GPP Release: Release 9

SIM Switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

Status: IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC

SMS: SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

USSD: Supports sending and reading Unstructured Supplementary Service Data messages

Block/Allow List: Operator block/allow list (by country or separate operators)

Band Management: Band lock, Used band status display

SIM PIN Code Management: SIM PIN code management enables setting, changing, or disabling the SIM card's PIN

APN: Auto APN

Bridge: Direct connection (bridge) between mobile ISP and device on LAN

Passthrough: Router assigns its mobile WAN IP address to another device on LAN

Ethernet

LAN: 2 x ETH ports (can be configured as WAN), 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

PoE IN

PoE Ports: 1 x PoE In

PoE Standards: 802.3af/at

PoE OUT

PoE Ports: 1 x PoE Out

PoE Standards: 802.3af Alternative B

PoE Max Power per Port (at PSE): 15 W Max (power supply unit dependent)

Network

Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

Network Protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN

VoIP Passthrough Support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall: Port forward, traffic rules, custom rules, TTL target customisation

Firewall Status Page: View all your Firewall statistics, rules, and rule counters

Ports Management: View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

Network Topology: Visual representation of your network, showing which devices are connected to which other devices

DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS: Supported >25 service providers, others can be configured manually

DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS

Network Backup: VRRP, Wired options, each of which can be used as an automatic Failover

Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes

SSHFS: Possibility to mount remote file system via SSH protocol

Traffic Management: Real-time monitoring, wireless signal charts, traffic usage history

Security

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator

Firewall: Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64

Attack Prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN: Port and tag-based VLAN separation

Mobile Quota Control: Mobile data limit, customizable period, start time, warning limit, phone number

WEB Filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access Control: Flexible access control of SSH, Web interface, CLI and Telnet

SSL Certificate Generation: Let's Encrypt and SCEP certificate generation methods

802.1x: Port-based network access control server

VPN

OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods

OpenVPN Encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

IPsec: XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

GRE: GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN: Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support

SSTP: SSTP client instance support

ZeroTier: ZeroTier VPN client support

WireGuard: WireGuard VPN client and server support

Tinc: Tinc offers encryption, authentication and compression in its tunnels. Client and server support.

OPC UA

Supported Modes: Client, Server

Supported Connection Types: TCP

MODBUS

Supported Modes: Server, Client

Supported Connection Types: TCP

Custom Registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality

Supported Data Formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Data to Server

Protocol: HTTP(S), MQTT, Azure MQTT

Data to Server: Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature

MQTT Gateway

Modbus MQTT Gateway: Allows sending commands and receiving data from MODBUS Server through MQTT broker

DNP3

Supported Modes: Station, Outstation

Supported Connection: TCP

DLMS/COSEM

DLMS Support: DLMS - standard protocol for utility meter data exchange

Supported Modes: Client

Supported Connection Types: TCP

COSEM: Allows to scan meter COSEM objects for automatic detection and configuration

API

Teltonika Networks Web API (beta) Support: Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

Monitoring & Management

WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status

FOTA: Firmware update from server, automatic notification

SSH: SSH (v1, v2)

Email: Receive email message status alerts of various services

SMS: SMS status, SMS configuration

Call: Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer

TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT: MQTT Broker, MQTT publisher

SNMP: SNMP (v1, v2, v3), SNMP Trap, Brute force protection

JSON-RPC: Management API over HTTP/HTTPS

RMS: Teltonika Remote Management System (RMS)

IoT Platforms

ThingWorx: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity - Cloud of Things: Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICC