Description
Reyee 1167Mbps Dual Band GbE Indoor Wi-Fi 5 Access Point
Indoor scenarios for higher education, government, general education, finance, and business sectors.
This AP provides both a stable 5 GHz band, and a wide-coverage 2.4 GHz band. Dual radios ensure stable connectivity for more STAs.
The built-in smart antenna can identify the direction of STAs relative to the AP. With Ruijie's proprietary roaming algorithm, this AP also supports 802.11k/v/r. Intelligent channel planning and accurate wireless positioning enable STAs to associate to the best AP nearby.
You do not need to pre-configure this AP before installation. Once connected to a Ruijie wireless AC, this AP can obtain configurations from the AC to complete provisioning, thus greatly reducing the implementation and maintenance workload.
Features
- Dual Radios, Combined Rate Up to 1167 Mbps
- Signals Never Drop with Seamless Roaming
- Auto Configuration, Simplified Provisioning, Easy Deployment
- Unified Cloud Management, Intelligent Tuning, Easy O&M
*Please note: Does not support Mesh
Technical Specification
-
Compliance with IEEE 802.3af standard (PoE)
-
Auto MDI/MDIX crossover
-
PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher)
-
802.3az EEE
-
Radio 1: 2.4 GHz, two spatial streams, 2x2 MIMO
-
Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO
-
Two spatial stream Single User (SU) MIMO for up to 300 Mbps wireless data rate to individual 2SS HT40 802.11n client devices (max.)
-
Two spatial stream Single User (SU) MIMO for up to 144.4 Mbps wireless data rate to individual 2SS HT20 802.11n client devices (typical)
-
Two spatial stream Single User (SU) MIMO for up to 867 Mbps wireless data rate to individual 2SS HT80 802.11ac client devices (typical)
-
2.4 GHz radio: 26 dBm (23 dBm per chain)
-
5 GHz radio: 26 dBm (23 dBm per chain)
-
Note: The transmit power is limited by local regulatory requirements.
-
12 V DC/1.5 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately.
-
PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE).
-
DC powered: 12.95 W
-
PoE powered (802.3af): 12.95 W
-
PoE+ powered (802.3at): 12.95 W
-
PoE++ powered (802.3bt): 12.95 W
-
Idle mode: 6 W